Services:
-
7 Days Replacement Policy
Inside the box
- Instax SP3 Printer - 1 Unit
- Instax Square Film (10x1)
SQUARE film
It’s playtime.
Shoot outside the box, play around with your creativity and start pushing boundaries.
Because when it’s time to press ‘print’ you’ll know whatever you’ve captured, the output will always be symmetrically perfect. Both beautifully and reassuringly.
Featuring the same high-end film and print tech as all our other Fujifilm products, our neatly framed SQUARE film is a perfectionist’s dream.
Come on, let’s play.
Let’s get printable
Take your memories offline and into a physical, fun and stylish print that’ll last a lifetime. And the most sophisticated way to do this? With the instax SHARE SP-3.
 |
FilmFilm – Fujifilm Instant Colour Film “instax SQUARE” (sold separately) Film – Size 86mm x 72mm Picture Size 62mm x 62mm Film Developing Time – Approximately 90 seconds (Varies depending on the ambient temperature) |
 |
Recording method3-colour exposure with OLED |
 |
Printer specsPrinting resolution – 318 dpi Printing levels – 256 levels per colour (RGB) Interface Standard compliance -IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch) Supported image format – JPEG, PNG Printing time – Image recording – photo output (Feed out) Approx. 10 sec. Approximate printing capacity – Approx. 100 prints (Based on our test conditions) *Varies depending on the conditions of use. Compatible FUJIFILM X Series models: X-A5, X-E3, X-T2, X-T20, GFX50S, X-Pro2, X-T1, X100F |
 |
Battery specsNP-50 battery. Charging time – Approx. 3 hours (Varies depending on the battery remaining level) Power consumption – 3 W Operating temperature – +5°C to + 40°C / +41°F to + 104°F(no condensation) |
 |
Dimensions & weight116 mm x 130.5 mm × 44.4 mm (excluding projections) 312g (without battery and film pack) |
 |
Accessories includedRechargeable Li-ion battery (NP-50) USB Cable Instruction manual Ferrite core |