Shoot outside the box, play around with your creativity and start pushing boundaries.
Because when it’s time to press ‘print’ you’ll know whatever you’ve captured, the output will always be symmetrically perfect. Both beautifully and reassuringly.
Featuring the same high-end film and print tech as all our other Fujifilm products, our neatly framed SQUARE film is a perfectionist’s dream.
Come on, let’s play.
Let’s get printable
Take your memories offline and into a physical, fun and stylish print that’ll last a lifetime. And the most sophisticated way to do this? With the instax SHARE SP-3.
Film – Fujifilm Instant Colour Film “instax SQUARE” (sold separately)
Film – Size 86mm x 72mm Picture Size 62mm x 62mm
Film Developing Time – Approximately 90 seconds (Varies depending on the ambient temperature)
3-colour exposure with OLED
Printing resolution – 318 dpi
Printing levels – 256 levels per colour (RGB)
Interface Standard compliance -IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch)
Supported image format – JPEG, PNG
Printing time – Image recording – photo output (Feed out) Approx. 10 sec.
Approximate printing capacity – Approx. 100 prints (Based on our test conditions) *Varies depending on the conditions of use.
Compatible FUJIFILM X Series models: X-A5, X-E3, X-T2, X-T20, GFX50S, X-Pro2, X-T1, X100F
NP-50 battery. Charging time – Approx. 3 hours (Varies depending on the battery remaining level)
Power consumption – 3 W
Operating temperature – +5°C to + 40°C / +41°F to + 104°F(no condensation)
Dimensions & weight
116 mm x 130.5 mm × 44.4 mm (excluding projections) 312g (without battery and film pack)
Rechargeable Li-ion battery (NP-50)